qnap surveillance station licenses generator

Next time the cameras go down, look athe switch it is plugged in to. If anything has packet flood detection on, it is possible that it is mistaking the video traffic as flooding and temporarily shutting down the ports. Based on the symptoms I am leaning toward firmware or the switches. If you use a managed switch the Viostar has load balancing using 802.3ad. What is the firmware version of your Viostar?Ĥ. If so, are they on the same switch or doesn't matter? Can you try as many cameras you can on one switch, leaving the other disconnected.ģ. Can you try half the cameras connected first? Is there any difference or is the same ting happening.Ģ. We really need all makes and models of all parts to see if there is a known issue.ġ. How is the power in the building, maybe connecting to a ups or voltage regulator would help Is there any other device attached to the network other than cameras and switches?Īre you overloading the switches are they gigabit? how many cameras per switch? When you replaced the router was it for the same model? how about the switches?

I really do appreciate it.Īre the Arecont's using the same cable? if not it is most likely not a cable issue. I just want to thank everyone that has given input. I'm thinking of biting the bullet and replacing the cable with cat6. It's really odd.I have never had this issue before, and I'm stressing out big time.įor the record, I have replaced the switch twice, the router twice and each camera once.

I did look back at footage and saw that the ones that did go out all went out at the same time. There isn't even an Internet connection in that part of their building. Unfortunately, the clients do not have these hooked up to the web, and do not want them to be for some reason. They are all set static, and they are all set to A moderate bitrate.

Qnap surveillance station licenses generator